...
NetAnders API Manual
The NetAnders API provides insight into the current and historical sustainable energy generation in the Netherlands.
What is an API?
An API (Application Programming Interface) is a software interface through which two applications can easily communicate with each other. By submitting a request with certain parameters such as the sustainable source and date, the NetAnders API returns the requested energy data.
What can you do with the NetAnders API?
If you have the right authorisation, with the NetAnders API you gain insight into:
The near real-time renewable energy production in the Netherlands
The sustainable production in capacity (kW) and in volume (kWh)
The utilization rates of sustainable energy sources expressed in percentages compared to the installed capacity
The various sustainable energy sources. Get insight to all of them of just a selection. We provide insights into the following sources: solar, onshore wind, offshore wind, biogas, heat pumps, geothermal energy, adding and co-firing of biomass in coal-fired power stations, biomass boilers companies, wood stoves at home, waste plants and bio-oil.
The historical sustainable production from 2016, the non-sustainable electricity production from 2021
10 minutes, 15 minutes, hour, day, month and year values
The total electricity production generated by various sources for the Netherlands
The gas consumption for the Netherlands, excluding feedstock and powerplant usage
….
What type of API is it?
The NetAnders API is a RESTful Open Api. The following file formats are available: jsonld, jsonhal, jsonapi, json, xml, csv and html.
Access to the API - API Key
NetAnders provides an API Key. This unique key gives access to requesting energy data from the NetAnders API. The API key must be sent with every request. Do not give the key to others.
API specifications
For the developers, the detailed specifications of the API can be found in Swagger UI or Redoc via the following links:
• Swagger UI: https://api.netanders.io/v1
• Redoc: https://api.netanders.io/v1?ui=re_doc
API request limit
The current rate limit of the API is set at 400 requests per minute.
Submitting a request
When submitting a request, a number of parameters must be included. The table below shows and describes the available parameter values. You can enter an individual value or a collection of values that refer to a series of individual values.
Example for a request
Suppose you want to receive the Dutch solar data in 10 minutes values on November 16, 2020 in json. To do this, include the following parameters in the request. Below we also highlight a request in cURL, PHP-cURL and Python.
The header
| Code Block |
|---|
Accept: application/ld+json: json – file format. X-AUTH-TOKEN: YourSuperSecretApiKey – API Key |
Main message
| Code Block |
|---|
Point: 0 - Netherlands Type: 2 - Solar Granularity 3 - 10 min Timezone 1 - UTC Classification 2 – current Activity 1 - providing Validfromstrictlybefore 2020-11-16 Validfromafter 2020-11-17 |
cURL
| Code Block |
|---|
curl --location -g --request GET 'https://api.netanders.io/v1/utilizations?point=0&type=2&granularity=3&granularitytimezone=1&classification=2&activity=10&validfrom[strictly_before]=2020-11-17&validfrom[after]=2020-11-16' \ --header 'X-AUTH-TOKEN: YourSuperSecretApiKey ' \ --header 'accept: application/ld+json ' |
PHP- cURL
| Code Block |
|---|
<?php
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => 'https://api.netanders.io/v1/utilizations?point=0&type=2&granularity=3&granularitytimezone=1&classification=2&activity=10&validfrom%5Bstrictly_before%5D=2020-11-17&validfrom%5Bafter%5D=2020-11-16',
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => '',
CURLOPT_MAXREDIRS => 10,
CURLOPT_TIMEOUT => 0,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_HTTP_VERSION => CURL_HTTP_VERSION_1_1,
CURLOPT_CUSTOMREQUEST => 'GET',
CURLOPT_HTTPHEADER => array(
'X-AUTH-TOKEN: YourSuperSecretApiKey ', ),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response; |
Python
| Code Block |
|---|
import requests
url = "https://api.netanders.io/v1/utilizations?point=0&type=2&granularity=3&granularitytimezone=1&classification=2&activity=10&validfrom[strictly_before]=2020-11-17&validfrom[after]=2020-11-16"
payload={}
headers = {
'X-AUTH-TOKEN': ' YourSuperSecretApiKey ',
'accept: application/ld+json '}
response = requests.request("GET", url, headers=headers, data=payload, allow_redirects=False)
print(response.text) |
Visualisation snippet
To get an idea of the energy data that is requested, we provide a snippet with which the data can be visualized. The snippet is easy to use in for example Postman, among others. The snippet can be found via this link: https://bitbucket.org/netanders/workspace/snippets/RLpGgL/postman-test-and-visualize
Response to the request
After the request, a result will be returned in the desired file format. The following data is returned:
• Capacity - the average capacity over the selected granularity in kW
• Volume - the production volume in kWh
• Percentage - the utilization rate as a percentage of the total capacity at that moment
• Emission – the emission of CO2 in kg
• Emissionfactor – the emission factor used for this source in kg/kWh, if no value is provided the emission is zero (0)
Tip: for a visualization of the generation it is easiest to use the capacity.
Below the data that is returned by the API. This is a record from the example mentioned.
| Code Block |
|---|
"@id": "/v1/utilizations/3844522221", "@type": "Utilization", "type": "/v1/types/2", "granularity": "/v1/granularities/3", "granularitytimezone": "/v1/granularity_time_zones/0", "id": 3844522221, "point": "/v1/points/0", "activity": "/v1/activities/1", "classification": "/v1/classifications/2", "capacity": 438626, "volume": 73104, "emission":, "emissionfactor":, "percentage": 0.05968400090932846, "validfrom": "2020-11-16T14:30:00+00:00", "validto": "2020-11-16T14:40:00+00:00", "lastupdate": "2020-11-19T14:06:04+00:00" |
Parameter table
Parameter | Description | Values |
Activity | Gives the activity type of the energy record. | 1 Providing |
Authorisation | Gives the Authorisations for users. | True |
Classification | Gives the Classification type of the energy record. (Ex. Near-realtime or Forecast) | 1 Backcast |
Granularity | Every Utilization data record is a grouped by a granularity. This table has the Granularity names. | 3 10 minutes |
GranularityTimeZone | Every Granularity is valid for a certain timezone, this data record holds the name of this timezone. | 1 UTC |
Point | Gives the Point of the energy record. | 0 Nederland |
Type | Gives the Type of the energy resource (for a more detailed description, see Detailed API Type descriptions ). | 0 All |
Historical data updates
Sometimes historical data provided by the API gets updated. Several triggers exist, which include
changes in the source data
changes in model parameters
changes in the model itself
Whenever a trigger has occurred the ‘lastupdate’ field is modified (note that this does not necessarily mean the interval value itself has changed). Some triggers are periodic (i.e. data gets recomputed daily) and others are manual (recomputation gets done by NetAnders’s request).
Any questions, just let us know!
